Apart from providing all repair and maintenance service, we also provide trailer inspection services.
We thoroughly inspect your trailer including the braking system, Spring assembly, Axle assembly, Tyres, Body, Display of NumberPlate, Fenders, Frame, Hitch, Identification Lamps, Reflectors, Tow Dollies, Side Marker and Clearance Lamps.
We make sure that all body parts of your trailer comply mandatory parameters of the competent transport authority.
We inspect following body parts of your trailer.
we check your trailer’s the entire braking system.
If the thickness of Brake lining is 5/16 inches or fewer at the centre of the shoe, we replace it.
In case if Linings or pads saturated with oil, grease or brake fluid cannot be cleaned, we replace it.
Except for hairline heat cracks, we replace brake drums with major cracks.
we make sure that Trailers with a gross weight of 1,500 to 3,000 lbs must have brakes on one axle while Trailers with a gross weight above3,000 lbs must have brakes on all wheels.
we make sure that emergency breakaway-braking device must be in tiptop condition.
By checking the entire spring assembly, we make sure that leaf spring and Spring hangers are not cracked, broken or missing nor shifted out of position.
By checking the entire Axle assembly, we ensure that All suspension assemblies are secure and U-bolts are not cracked, broken, or loose.
We check your tyres and wheel.
We make sure that tyres are not mounted or inflated or flat or bulged.we check wheels and rims and ensure that they are in sound shape without cracks
we ensure that Tires shall have a tread groove pattern depth of at least 2/32 of an inch when measured at any point on a major tread groove.
we ensure that wheel fasteners are Not loose or broken, or missing.
we make sure that coupling should adequately support and maintain control of the towed vehicle without cracks or with excessive wear.
we ensure that safety chains be crossed under the hitch and
function properly in case of an attachment device fails.
we make sure that cross members should
not be loose or miss or cracked or bent or rusted to weaken the frame.
we ensure that Body mount, bolts and rivets should not be missing or deteriorated.
We ensure that Trailers with an excess of 3,000-lbs. gross weight should have either mudguards or fenders.
10. LIGHTING & REFLECTORS
Except for hazard lamps, we inspect all the lamps including Tail lamps, Stop lamps, Turn signal lamps and Reflectors.